Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 238)

Chapter 6 Using Profile Utilities
238
Figure 115. Update Firmware window
5. The update procedure steps through the reprogramming of the components,
giving progress information as it proceeds. It retries up to three times to
reprogram parts in the event of verification errors. After reprogramming all
parts, a summary is provided that describes what has been done.
6. If parts have failed to program, power down the Profile unit completely,
power it up again, and then run the program again; otherwise, just restart the
Profile.
7. After the program runs successfully, restart your disk recorder so the
changes can take effect.