Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 183)

Panel Basics
Profile Family 183
10. The Normal normal plays the selected clip or clip list to the end, freezing on
the last field of the clip or of the last clip in the list.
11. The Loop button plays the selected clip or clip list continuously, looping
back to the beginning of the clip when the clip ends, or in the case of a clip
list, looping back to the first clip in the list when the last clip ends. If you
create a clip while in
Loop mode, you are asked to enter a clip length in the
form 00:00:00:00 (Hours:Minutes:Seconds:Frames). The Record operation
will automatically stop at the specified timecode, thus protecting disk
storage space.
12. The Bounce button plays the selected clip or clip list continuously, until at
the end of the clip, it plays the clip in reverse, or in the case of a clip list, it
plays to the end of the clip list, then reverses the sequence, playing all the
clips in reverse order. If you create a clip while in
Bounce mode, you are
asked to enter a clip length in the form 00:00:00:00
(Hours:Minutes:Seconds:Frames). The
Record operation will automatically
stop at the specified timecode, thus protecting disk storage space.
13. The PB/EE ( Playback/E to E ) button determines the action during Stop or
Record . If you select Playback , the recorded image is displayed as a still
during Stop , and audio is silenced. If E to E is selected, the input signal is
routed through to the display during Stop or Record .