Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 202)

Chapter 4 Using VdrPanel
202 Profile Family
To trim a clip:
1. Select a clip with either in or out marks or both in the Clip Name box.
2. Click the Trim to Mark button to remove the portion of the current clip
preceding the in mark.
3. Click the Trim from Out Mark button to remove the portion of the current
clip following the out mark.
Setting Field Dominance for Marks
You can set field dominance so that a clip’s mark-in and mark-out points occur
at field 1 or field 2 of a given frame. By default, the field dominance is set so
that either field 1 or field 2 can be a mark-in or mark-out point. To change field
dominance:
1. Choose Options | Field Dominance . The Field Dominance dialog box
appears (Figure 100).
Figure 100. Field Dominance dialog box
2. Click Field 1 or Field 2 .
3. Click OK . The change takes effect immediately.
NOTE: Field dominance applies to JPEG clips only and the latest
field dominance setting applies to all open panels.