beautypg.com

Multiscan scanning cards – Measurement Computing TempScan/1100 User Manual

Page 55

background image

TempScan / MultiScan User's Manual

889897

Scanning Cards 3-7

MultiScan Scanning Cards

The MultiScan/1200 master unit and any Exp/10A and Exp/11A expansion units connected to this master
unit, can each accept the following two kinds of optional scanning cards:

• MTC/24 Thermocouple/Volt Scanning Module
• MHV/24 High-Voltage Scanning Module

Note: Do not mix TempScan/1100 and MultiScan/1200 scanning cards within the same system.

TempScan/1100 scanning cards are designed for and supported only by the TempScan/1100
master unit. Likewise, MultiScan/1200 scanning cards are designed for and supported only by
the MultiScan/1200 master unit. Otherwise, operating errors or equipment damage may
occur.

Each scanning card contains screw-terminal blocks for quick and easy input connections. Connections are
made by inserting the wire into a screw-terminal socket.

Several tie-down holes are provided for tie-wrap strain reliefs to keep wires from all the channels organized
and manageable before they exit the rear panel of the master or expansion unit.

To keep noise outside and to maintain a constant internal temperature, each scanning card fits into
a shielded metal enclosure inside the master or expansion unit. The foam padding on the scanning card
provides an air dam to minimize gradients.

This manual is related to the following products: