Exp/11a expansion unit, Introduction, Front panel indicators – Measurement Computing TempScan/1100 User Manual
Page 43: Rear panel switches & connectors
TempScan / MultiScan User's Manual
889897
Expansion Unit 2-7
Exp/11A Expansion Unit
Introduction
All Exp/11A components are carefully inspected prior to shipment. When you receive your two-slot
expansion chassis, carefully unpack all items from the shipping carton and check for any damage which may
have occurred during shipment. Promptly report the damage to the shipping agent and your sales
representative. Retain all shipping materials in case you must return the unit to the factory.
Front Panel Indicators
Three (3) LED indicators on the front panel of the Exp/11A display the status of the expansion unit:
• SCAN: ON when the master unit is storing a expansion channel scan in its internal buffer.
• ERROR: ON when an error has occurred, OFF when no error condition exists. For more information,
see command Query Error Status (
E?
).
• POWER: ON when power is applied to the unit and the power switch on the back panel is in the ON
position (depressed). OFF if power is not present.
Rear Panel Switches & Connectors