Measurement Computing TempScan/1100 - Manual (Page 158)

CV-26 ChartView 988992 Software Reference
Convert Existing
Files
You may find that you need to convert data files from one format to another to make them
acceptable for viewing in your intended view application. If so, you can use the Convert
Existing Files selection to bring up a window similar to the following. From the window you
can search for a file, select it, then convert it from its present format to another. Clicking the
button (lower right section of the window) brings up a list of all available formats
to which the selected file can be converted to. Once the desired formats have been selected,
simply click the button.
Selecting a File for Conversion
Device
… Interface ¾
Setup IEEE 488
The IEEE 488 Setup dialog box appears. Valid addresses are 0 to 30. DIP switch settings
must agree with this setup. For ChartScan, an IEEE 488 interface card is required for use
of IEEE 488 interface. NetScan devices can not make use of the IEEE 488 interface.
When using ChartView with IEEE 488 applications, you must make use of an IOtech
Driver 488 driver. In addition, the device must be configured in the Driver 488 and be
named WAVE.
NetScan devices can not make use of the IEEE 488 interface.