Measurement Computing TempScan/1100 - Manual (Page 206)

A-10 API Command Reference 889897 TempScan / MultiScan User’s Manual
Command Syntax Description
U User Status Ureq Request information about various internal conditions of the
unit where req refers to one of the following request types:
0 - Query and clear the Event Status Register ( ESR )
1 - Query the Status Byte Register ( STB )
2 - Query and clear the Calibration Status Register ( CSR )
3 - Query the current system settings
4 - Query the current High/Low/Last (HLL) Registers
5 - Query and clear the current High/Low/Last (HLL) Registers
6 - Query the Buffer Status String
7 - Query the assigned alarm outputs
8 - Query the configured channels
9 - Query the digital inputs
10 - Query the installed memory option
11 - Query the current alarm channels
12 - Query the Time/Date stamping of the last calibration
13 - Query the last scan read
14 - Query the card ID types
15 - Query the product information
16 - Query the measuring parameters (MultiScan/1200 only)
17 - Query Root Mean Square (RMS) (MultiScan/1200 only)
18 - Query the acquisition states and various system flags
Vval Set the User Terminator value to any character whose numeric
value (ASCII value) val is in the range 0 to 255 .
V Set User Terminator
V? Query the present User Terminator value.
W# Set Averaging Weight
(MultiScan/1200
only)
W#wt Specify the number of samples to average in line cycle
integration / high-speed multi-channel mode where wt is the
averaging weight. Valid options for wt are: 1 , 2 , 4 , 8 , 16 ,
32 (default), 64 , 128 , and 256 .
X Execute X Execute preceding command string.
Ypre,
post,
stop
Set acquisition counts where pre is the Pre-Trigger count,
post is the Post-Trigger count and stop is the Post-Stop
count.
Y Set Counts
Y? Query current acquisition count selections.
Command Extension Syntax Description
? Query ? Query the present configuration or mode of the command
preceding the ?