Rack-mount & bench-top assembly, Rack mount, Bench top – Measurement Computing TempScan/1100 User Manual
Page 35: Rack-mount & bench-top assembly -21

TempScan / MultiScan User’s Manual
899493
System Overview 1-21
Rack-Mount & Bench-Top Assembly
The TempScan/1100, MultiScan/1200, Exp/10A and Exp/11A package each includes accessories for rack-mount or bench-
top assembly.
Rack Mount
If rack-mount assembly is required, remove the two plastic screws from the pre-drilled holes on each side
of the unit. Since the unit can be mounted with the front or rear panel facing the front of the rack fixture,
remove only those screws from the set of holes that will be toward the front of the rack. Attach the two
rack ears using the enclosed screws.
Bench Top
If bench-top assembly is required, install the self-adhesive rubber feet on the bottom of the unit
approximately one inch from each corner.