Measurement Computing TempScan/1100 - Manual (Page 160)

CV-28 ChartView 988992 Software Reference
Setup Network Setup Network is a purchased option that provides a
means of configuring systems that have a Net232
Ethernet/RS-232 Converter. For details regarding
the Net232 refer to the Net232 User’s Guide (p/n
1037-0901). A copy of the guide is shipped with the
Net323 device.
Upon selecting “Setup Network” the Network
Interface Configuration dialog box will appear
(following figure), but only if the option has been
authorized.
Network Interface Configuration
Dialog Box
If no authorization code was previously entered, an “Internet Options” message will appear as
in the upper image of the following figure. Clicking the button on this
message box brings up the “Authorization” box (following figure, lower image).
After entering
C3523DFA6C0A and clicking the button you will be able to
access the Network Interface Configuration dialog box. From that box you can configure the
scan device for the Ethernet.
Message and Authorization Code Boxes
Reference Note: For details regarding the Net232, refer to the Net232 User’s
Guide (p/n 1037-0901). A copy of the guide is shipped with the Net323
Ethernet/RS-232 Converter.
Simulated Instrument The program will generate data from a simulated instrument with no actual hardware
concerns
.