Measurement Computing TempScan/1100 - Manual (Page 151)

Software Reference 988992 ChartView , CV-19
Arm Acquisition
You can use the Arm Acquisition button to activate an acquisition. When you click on this button the system is
“armed” to begin collecting data by a recognized trigger (as set in the acquisition setup dialog box.) Three cases
are as follows:
1) If there is no Pre-trigger defined, the Trigger option under the Event Configuration portion of the
Acquisition Setup dialog box will determine when the Arm process is initiated.
Console Trigger Box
2) When a Pre-trigger is defined, the Arm process is initiated as soon as the Arm Acquisition is selected.
3) If a keystroke is chosen as the trigger, the Console Trigger dialog box will appear when the Arm
Acquisition is selected.
Disarm...
Use the “Disarm…” button to deactivate the data acquisition process at any point during an active acquisition.
The following confirmation dialog box will appear when this item is selected.
Message Box Regarding Possible Data Loss
Print Charts
The Print Charts button activates a screen print of ChartView’s main window.