Measurement Computing TempScan/1100 - Manual (Page 170)

CV-38 ChartView 988992 Software Reference
Channel and Alarm Setup Dialog Box
Channel and Alarm Setup, Button Descriptions
(1) – Turn On All Channels (Alt + N)
(2) – Turn Off All Channels Not Assigned to Charts (Alt + F)
(3) – Turn On/Off Channel Readings (Alt + R)
(4) – Print Entire Channel and Alarm Setup (Alt + P)
The following table indicates message and pull-down menu aspects of the Channel and Alarm Setup
Dialog Box.
Channel and Alarm Setup Dialog Box
Message and Pull-Down List Aspects
Column Message Pull-Down List *
1 CH N/A No
2 On ENABLE or DISABLE Yes
3 Reading N/A No
4 Type CHOOSE TYPE-> Yes
5 Label ENTER LABEL (MAX = 8 LETTER) No
6 Units CHOOSE UNITS-> Yes
7 Low ENTER DESIRED LOW LIMIT No
8 High ENTER DESIRED HIGH LIMIT No
9 Hyst ENTER DESIRED HYSTERESIS No
10 Alarm# SELECT AN ALARM# Yes
* A “Yes” indicates the item has an associated pull-down list from which a
selection can be made.
The pull-down list selection or copy/paste process are useful for making multiple channel
configuration changes within a column. You may double-click within a cell to make your way
through all the possible selections. The selections are repetitive; in other words, you will eventually
advance to the same selection with which you started.
The following text provides more detail regarding the channel and alarm configuration parameters.
The number preceding the text refers to the column number with “1” being the left-hand column and
“10” being the right-hand column of the Channel and Alarm Setup Dialog Box.