Basler Electric DGC-2020HD - Manual (Page 292)

282 9469300990 Rev B
Figure 180. Login Screen
2. Enter the username and password of the administrator and then click the Log In button. The default
administrator username is “A” and the default password is “A”.
3. Only the administrator can modify usernames and passwords on the User Name Setup screen
(Figure 181). Usernames and passwords can be as many as 16 alphanumeric characters in length
and are not case sensitive.
Figure 181. User Name Setup Screen
4. In the left-hand column, highlight any user name labeled UNASSIGNED or highlight a specific user
name to change it.
5. On the right side of the screen, enter a User Name.
6. Enter a password for the user.
7. Re-enter the password to verify it.
8. Using Table 80 as a reference, enter the maximum access level allowed for the user.
9. Enter the number of days to expiration of the password or leave at default (0) for no expiration.
10. Click the Save User button to save to the settings to BESTCOMSPlus memory.
11. Pull down the Communication menu and select Upload Security to Device. The Login dialog box
appears. An administrator level is required to upload security settings to the device.
12. Enter the username and password of the administrator and then click the Log In button. The default
administrator username is “A” and the default password is “A”. BESTCOMSPlus notifies you when
the upload is successful.
Security DGC-2020HD