Basler Electric DGC-2020HD - Manual (Page 220)

210 9469300990 Rev B
Name Description Symbol
Sync Phase
Angle OK True when the auto synchronizer is running
and the phase angle between the bus
voltage input and the generator voltage
input are within the limits indicated by the
phase angle setting for phase lock
synchronization, or the calculated advance
angle for anticipatory synchronization.
Sync Slip
Frequency OK True when the auto synchronizer is running
and the phase angle between the bus
voltage input and the generator voltage
input are within the limits indicated by the
slip frequency setting.
Sync Voltage
OK True when the auto synchronizer is running
and the voltage difference between the bus
voltage input and the generator voltage
input are within the limits indicated by the
voltage window setting.
var Mode Active True when var mode is active.
Communications
AEM Connected True when an optional AEM-2020 is
connected to the DGC-2020HD.
CEM Connected True when an optional CEM-2020 is
connected to the DGC-2020HD.
Configurable Protection
Threshold x Trip True when the Alarm Configuration is set to
Status Only and the threshold has been
exceeded.
Front Panel Buttons
Auto True while the Auto front panel button is
pressed.
Down True while the Down front panel button is
pressed.
Edit True while the Edit front panel button is
pressed.
Lamp True while the Lamp front panel button is
pressed.
Left True while the Left front panel button is
pressed.
Off True while the Off front panel button is
pressed.
Reset True while the Reset front panel button is
pressed.
Right True while the Right front panel button is
pressed.
Run True while the Run front panel button is
pressed.
BESTlogic
™Plus
DGC-2020HD