Basler Electric DGC-2020HD - Manual (Page 284)

274 9469300990 Rev B
is determined to be in a low-line configuration. If determined to be in low-line configuration, the Low-Line
Override function forces the DGC-2020HD into the low-line configuration.
If the Low-Line Override function is assigned to a contact input via the Programmable Functions screen,
the state of the contact input and the detected configuration are ORed. This means, if one or both are
true, then the system is determined to be configured for low-line.
Single-phase Detect Generator Connection
This setting specifies which single-phase connection to use when the system is determined to be single
phase. Single-phase A-B or Single-phase A-C can be selected.
Configuration DGC-2020HD