Basler Electric DGC-2020HD - Manual (Page 127)

9469300990 Rev B 117
Locator Setting Range Increment Unit
C Correction Pulse Width 0 to 99.9 0.1 seconds
D Correction Pulse Interval 0 to 99.9 0.1 seconds
Speed Settings
E Kp Proportional Gain 0 to 1,000 0.001 n/a
F Ki Integral Gain 0 to 1,000 0.001 n/a
G Kd Derivative Gain 0 to 1,000 0.001 n/a
H Td Derivative Gain 0 to 1 0.001 n/a
I Kg Loop Gain 0 to 1,000 0.001 n/a
J Speed Trim Enable Disable or Enable n/a n/a
K Speed Trim Setpoint 47 to 100 0.01 Hz
L Remote Speed Bias Source
Aux Inputs 1 to 4 or
None
n/a n/a
M Remote Speed Bias 0 to 5 0.01 %
kW Settings
N Load Control Enabled Disable or Enable n/a n/a
O Load Share Interface Analog or Ethernet n/a n/a
P Kp Proportional Gain 0 to 1,000 0.001 n/a
Q Ki Integral Gain 0 to 1,000 0.001 n/a
R Kd Derivative Gain 0 to 1,000 0.001 n/a
S Td Derivative Filter Constant 0 to 1 0.001 n/a
T Kg Loop Gain 0 to 1,000 0.001 n/a
U Droop Percentage 0 to 10 0.001 %
V Speed Droop Gain 0 to 1,000 0.001 n/a
W Ramp Rate 0 to 100 0.1 % per second
X Base Load Level 0 to 100 0.1 %
Y Base Load Level Source
User Setting or Aux
Input 1 to 4
n/a n/a
Z Base Load Analog Max 0 to 100 0.1 %
AA Base Load Analog Min 0 to 100 0.1 %
BB Breaker Open Setpoint 0 to 100 0.1 %
DGC-2020HD Bias Control