Basler Electric DGC-2020HD - Manual (Page 110)

100 9469300990 Rev B
Figure 47. Settings Explorer, System Parameters, Remote Module Setup
3. Open the Contact Inputs screen, in the Settings Explorer, under Programmable Inputs. Enter “Open
Gen Breaker” into the label text field of Input #9. Enter “Close Gen Breakr” into the label text field of
Input #10. Finally, enter “Breaker Status” into the label text field of Input #13. Up to 16 alphanumeric
characters are accepted by a label text field. See Figure 48.
Synchronizer DGC-2020HD