Basler Electric DGC-2020HD - Manual (Page 250)

240 9469300990 Rev B
Figure 153. Dual Copper Ethernet Port Configuration
Figure 154. Fiber Optic Ethernet Port Configuration
Configurable options include:
IP Address: Internet Protocol Address to be used by the DGC-2020HD
Default Gateway: Default host to send data destined for a host not on the network subnet.
Subnet Mask: Mask used to determine the range of the current network subnet.
Use DHCP: Automatically configures IP Address, Default Gateway, and Subnet Mask via
DHCP. This can be used only if the Ethernet network has a properly configured
DHCP server running. The DGC-2020HD does not act as a DHCP server.
Redundant Ethernet: Available with dual copper Ethernet ports only. Checking this box disables the
settings for Ethernet port 2 and designating it as a redundant port.
Communication DGC-2020HD