Rockwell Automation 284 ArmorStart User Manual - Manual (Page 70)

3-8 Bulletin 280/281 Programmable Parameters
Prod Assy Word 0
This parameter is used to build
bytes 0-1 for produced assembly
120
Parameter Number 13
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 108
Default Value 1
Produced Assy Word 1
This parameter is used to build
bytes 2-3 for produced assembly
120
Parameter Number 14
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 108
Default Value 4
Prod Assy Word 2
This parameter is used to build
bytes 4-5 for produced assembly
120
Parameter Number 15
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 108
Default Value 5
Prod Assy Word 3
This parameter is used to build
bytes 6-7 for produced assembly
120
Parameter Number 16
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 108
Default Value 6
Consumed I/O Size
This parameter reflects the
consumed I/O data size in bytes.
Parameter Number 17
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 1