Rockwell Automation 284 ArmorStart User Manual - Manual (Page 373)

Appendix
C
Bulletin 283 CIP Information
Electronic Data Sheets Electronic Data Sheets (EDS) files are specially formatted ASCII
files that provide all of the information necessary for a configuration
tool (e.g. RSNetWorx™ for DeviceNet™) to access and alter the
parameters of the device. The EDS file contains all of the device
information: number of parameters, groupings, parameter name,
minimum, maximum, and default values, units, data format and
scaling.
EDS files for all the ArmorStart ® Distributed Motor Controller units
are available from the Internet at
http://www.ab.com/networks/eds.
They may also be built automatically by some configuration tools
since all of the information necessary for a basic EDS file may be
extracted from the ArmorStart Distributed Motor Controller.
Soft Starter Type Product Codes
and Name Strings Product codes for the Bulletin 283 Distributed Motor Controllers are
based on the Overload relay current rating and the control power
rating of the starter. The following table lists the product codes for the
Bulletin 283 Distributed Motor Controllers: