Rockwell Automation 284 ArmorStart User Manual - Manual (Page 130)

5-8 Bulletin 284 Programmable Parameters for Volts per Hertz Controllers
Network Override
This parameter allows for the local logic to override a Network fault.
0 = Disable
1 = Enable Parameter Number 8
Access Rule GET/SET
Data Type BOOL
Group DeviceLogix
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
Comm Override
This parameter allows for local logic to override a loss of an I/O connection.
0 = Disable
1 = Enable Parameter Number 9
Access Rule GET/SET
Data Type BOOL
Group DeviceLogix
Units —
Minimum Value 0
Maximum Value 1
Default Value 0