Rockwell Automation 284 ArmorStart User Manual - Manual (Page 112)

4-22 Bulletin 283 Programmable Parameters
ZIP Parameters
AutoRun Zip
Enables ZIP data production on
power up
0=Disable
1=Enable
Parameter Number 67
Access Rule GET/SET
Data Type BOOL
Group ZIP Parameters
Units
MinimumValue 0
Maximum Value 1
Default Value 0
Zone Produced EPR
The Expected Packet Rate in
msec. Defines the rate at which
ZIP data is produced. Defaults to
75 msec.
Parameter Number 68
Access Rule GET/SET
Data Type UINT
Group ZIP Parameters
Units msec
MinimumValue 0
Maximum Value 65535
Default Value 75
Zone Produced PIT
The Production Inhibit Time in
msec. Defines the minimum
time between Change of State
data production
Parameter Number 69
Access Rule GET/SET
Data Type UINT
Group ZIP Parameters
Units msec
MinimumValue 0
Maximum Value 65535
Default Value 75
Zone #1 MAC ID
The node address of the device
whose data is to be consumed
for zone 1
Parameter Number 70
Access Rule GET/SET
Data Type USINT
Group ZIP Parameters
Units —
MinimumValue 0
Maximum Value 64
Default Value 64
Zone #2 MAC ID
The node address of the device
whose data is to be consumed
for zone 2
Parameter Number 71
Access Rule GET/SET
Data Type USINT
Group ZIP Parameters
Units —
MinimumValue 0
Maximum Value 64
Default Value 64