Rockwell Automation 284 ArmorStart User Manual - Manual (Page 411)

Bulletin 284 CIP Information D-11
Instance 167 is input (produced) assembly for Inverter Type
Distributed Motor Controllers with Network Outputs
Table D.30 .Instance 167 —Produced Inverter Type Starter with Network
Options
➊ If 284A is selected.
➋ Refers to output contactor status.
➌ Refers to source brake contactor status.
Power Flex Native Assemblies
These assembly instances have the same data format as the Power
Flex Drives with a DNet adapter.
Power Flex Native Consumed Assembly
Instance 170 is the Power Flex Native Format Consumed Assembly
Table D.31 Instance 170 — Power Flex Native Format Consumed Assembly.
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
At
Reference
Net Ref
Status
Net Ctl
Status
Ready
Running
Rev
Running
Fwd
Alarm Tripped
1
Contactor 2
➋
Contactor 1
➌
140M
On
HOA
Status
User In 4 User In 3 User In 2 User In 1
Reserved
➊
Reserved
➊
Reserved
➊
Reserved
➊
2 Output Frequency (Low) (xxx.x Hz)
3 Output Frequency (High) (xxx.x Hz)
4 Net Out 8 Net Out 7
Net
Out 6
Net
Out 5
Net Out 4 Net Out 3 Net Out 2 Net Out 1
5 Net Out 15
Net
Out 14
Net
Out 13
Net Out
12
Net Out
11
Net Out
10
Net Out 9
6 ZIP Device Value Key (Low)
7 ZIP Device Value Key (High)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 MOP Inc reserved Direction Cmd Flt Reset Jog Start Stop
1 MOP Dec
Freq Select
3
Freq Select
2
Freq
Select 1
Decel
2
Decel
1
Accel
2
Accel
1
2 Comm Frequency Command (Low)
3 Comm Frequency Command (High)