Lenze i700 - Manual (Page 134)

5 Motor control & motor settings
5.13 Parameterising filter elements in the setpoint path
134
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0x2944 | 0x3144 - Torque: Notch filter setpoint torque

Note!
Readjust the speed controller after setting the notch filters.  Setting the speed
controller . ( 113)
For permanent storage, the changed settings must be uploaded to the controller from
the i700 servo inverter.
The »EASY Starter« serves to save the parameter settings of the i700 servo inverter as
parameter file (*.gdc). In the »PLC Designer«, this file can then be imported in the
corresponding axis.  Saving changed parameters safe against mains failure ( 60)
Sub. Name Lenze setting Data type
 1 Notch filter 1: Frequency 200.0 Hz UNSIGNED_16
 2 Notch filter 1: Bandwidth 20.0 Hz UNSIGNED_16
 3 Notch filter 1: Damping 0 db UNSIGNED_8
 4 Notch filter 2: Frequency 400.0 Hz UNSIGNED_16
 5 Notch filter 2: Bandwidth 40.0 Hz UNSIGNED_16
 6 Notch filter 2: Damping 0 db UNSIGNED_8
Subindex 1: Notch filter 1: Frequency
Setting range (min. value | unit | max. value) Lenze setting
1.0 Hz 1000.0 200.0 Hz
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_16
Subindex 2: Notch filter 1: Bandwidth
Setting range (min. value | unit | max. value) Lenze setting
0.0 Hz 500.0 20.0 Hz
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_16
Subindex 3: Notch filter 1: Damping
Setting range (min. value | unit | max. value) Lenze setting
0 dB 100 0 db
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 4: Notch filter 2: Frequency
Setting range (min. value | unit | max. value) Lenze setting
1.0 Hz 1000.0 400.0 Hz
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_16
Subindex 5: Notch filter 2: Bandwidth
Setting range (min. value | unit | max. value) Lenze setting
0.0 Hz 500.0 40.0 Hz
 Write access  CINH  OSC  P  RX  TX Scaling: 1/10 UNSIGNED_16