Lenze i700 - Manual (Page 12)

1 About this documentation
12
Lenze · i700 servo inverter · Reference manual · DMS 1.5 EN · 03/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
Target group
This documentation addresses to all persons who want to parameterise, configure, and diagnose
the i700 servo inverter.
Validity
The information in this documentation are valid for the following standard devices:
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the i700 servo inverter and the software version of the engineering tools installed (»PLC
Designer« or »EASY Starter«), the screenshots in this documentation may deviate from the screen
representation.
Document history

Tip!
Information and tools regarding the Lenze products can be found in the Internet:
http://www.lenze.com  Download

Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions
before switching on the controller.
Please read the safety instructions in the mounting instructions and in the hardware
manual for the i700 servo inverter. Both instructions are included in the scope of supply
of the drive controller.
Product series Type designation From software version
i700 servo inverter E70ACM... 01.00
Version Description
1.5 03/2014 TD05 Extensions & corrections; Adaptation to software version V01.06
1.4 10/2013 TD05 Extensions & corrections;
Adaptation to software versions V01.04 and V01.05
1.3 03/2013 TD05 Extensions & corrections; Adaptation to software version V01.03
1.2 10/2012 TD05 Extensions & corrections; Adaptation to software version V01.02
1.1 07/2012 TD05 First edition