Lenze EVS9332xK - Manual (Page 4)

Contents i
l
ii EDSVS9332K EN 8.0−07/2013
4 Installation of the standard device 4−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Standard devices in the power range 0.37 ... 11 kW 4.1−1 . . . . . . . . . . . . . . .
4.1.1 Important notes 4.1−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.2 Mounting with fixing rails (standard) 4.1−2 . . . . . . . . . . . . . . . . . . .
4.1.3 Thermally separated mounting (push−through technique) 4.1−3 .
4.1.4 Mounting in "cold plate" technique 4.1−4 . . . . . . . . . . . . . . . . . . . .
4.2 Standard devices in the power range 15 ... 30 kW 4.2−1 . . . . . . . . . . . . . . . . .
4.2.1 Important notes 4.2−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2 Mounting with fixing brackets (standard) 4.2−2 . . . . . . . . . . . . . . .
4.2.3 Thermally separated mounting (push−through technique) 4.2−3 .
4.2.4 Mounting in "cold plate" technique 4.2−4 . . . . . . . . . . . . . . . . . . . .
4.3 Standard devices with a power of 45 kW 4.3−1 . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1 Important notes 4.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2 Mounting with fixing brackets (standard) 4.3−2 . . . . . . . . . . . . . . .
4.3.3 Thermally separated mounting (push−through technique) 4.3−3 .
4.3.4 Modification of the fan module for push−through technique 4.3−4
4.4 Standard devices in the power range 55 ... 75 kW 4.4−1 . . . . . . . . . . . . . . . . .
4.4.1 Important notes 4.4−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.2 Mounting with fixing brackets (standard) 4.4−2 . . . . . . . . . . . . . . .
4.4.3 Thermally separated mounting (push−through technique) 4.4−3 .