Lenze EVS9332xK - Manual (Page 354)

Configuration
Code table
8
8.4
l
8.4−80 EDSVS9332K EN 8.0−07/2013
IMPORTANT Possible settings Code
Selection Lenze Designation No.
C1718
s
® Selection list 1 STORE3
Configuration of analog input signals
1 STORE3−OFFSE
T
1000 FIXED0% Selects the memory location the content of
which is to be output
2 STORE3−FREE 1000 FIXED0% Reserved
C1719 g STORE3
Configuration of analog input signals
1 (C1718/1)
2 (C1718/2)
C1720
s
® Selection list 2 STORE3
Configuration of digital input signals
1 STORE3−INIT 1000 FIXED0 Initialisation of all memory locations with the
value applied to STORE3−INIT−POS. The input
has the highest priority.
l LOW/HIGH edge: Starts the initialisation
of all memory locations. The handshake
signals at STORE3−BUSY and STORE3−RDY
indicate the status of the initialisation.
l LOW: sets STORE3−RDY = 0
l HIGH: inhibits all other functions
2 STORE3−LOAD−I
N−POS
1000 FIXED0 l LOW/HIGH edge: Transfers the value at
STORE3−IN−POS to the memory location
STORE3−SEL−IN
3 STORE3−STORE−
PHOUT
1000 FIXED0 STORE3−MODE = LOW:
l LOW/HIGH edge: Transfers the content of
memory location STORE3−SEL−OUT to
STORE3−PHOUT
STORE3−MODE = HIGH:
l Input inactive
4 STORE3−MODE 1000 FIXED0 l LOW: The data of memory location
STORE3−SEL−OUT is output to
STORE3−STORE−PHOUT.
l HIGH: The memory location to be output
to STORE3−PHOUT is calculated from
STORE3−SEL−IN ˘ STORE3−OFFSET. The
output is continuous.
C1721 g STORE3
Display of digital input signals
1 (C1720/1)
... ...
4 (C1720/4)
C1722
s
® Selection list 3 STORE3
Configuration of input signals
1 STORE3−INIT−P
OS
1000 FIXED0INC Value for initialising all memory locations.
l The initialisation is started by a
LOW/HIGH edge at STORE3−INIT.
2 STORE3−IN−POS 1000 FIXED0INC Value to be transferred to the memory
location selected with STORE3−SEL−IN.
l The value is transferred with a LOW/HIGH
edge at STORE3−INIT.
C1723 g {1 inc} STORE3
Display of input signals
1 (C1722/1)
2 (C1722/2)