Lenze EVS9332xK - Manual (Page 275)

Configuration
Code table
8
8.4
l
8.4−1 EDSVS9332K EN 8.0−07/2013
8.4 Code table
How to read the code table
Column Abbreviation Meaning
Code Cxxxx Code Cxxxx l Parameter value of the code can be defined
differently for each parameter set
l Parameter value is accepted immediately (ONLINE)
1 Subcode 1 of Cxxxx
2 Subcode 2 of Cxxxx
v Changed parameter of code or subcode is accepted after pressing T V
s Changed parameter of code or subcode is accepted after pressing T V when
the controller is inhibited
Designation Designation of the code
Lenze Lenze setting (value at delivery or after restoring the delivery status with C0002)
à The column "IMPORTANT" contains additional information
g The code only displays a value. It cannot be configured.
Selection 1 {%} 99 Min. value {unit} max. value
IMPORTANT − Short, important explanation
Code Possible settings IMPORTANT
No. Designation Lenze Selection
C0002
s
PAR LOAD 0 Load parameter set
0 Default setting Restore delivery status
1 Load parameter set 1 Load and activate the parameter set stored in
the controller
l Parameter set 1 is loaded automatically
after every mains connection.
11 Load parameter set externally Load parameter set from the keypad into the
controller
C0003 PAR SAVE 0 Save parameter set
0 Done Saving completed
1 Save parameter set 1 Save the parameters loaded into the
controller in the parameter set
C0004 OP DISPLAY 56 0 {1} 1999 Operating display
Keypad shows selected code in the operating
level if no other status messages of C0183
are active