Ag Leader EDGE Ver.4.5 Users Manual - Manual (Page 93)

81
P
LANTING
2. Choose an .irx (prescription) file from the names list. Press
the checkmark box when complete.
3. Once selected, the Prescription button on the Planting
Rate Control Configuration Screen will change its
appearance to the Remove Prescription button, which
appears as a minus sign. This will allow you to clear out
the selected prescription. (For an example, see below).
• (A) Default Prescription Rate
• (B) Remove Prescription button
R
OW
S
HUTOFF
By configuring your display with Row Shutoff, you can start and stop seed flow and control planter
sections row-by-row, allowing AutoSwath Control to automatically turn planter row units on and off based
on your planting map.
R
OW
S
HUTOFF
C
ONFIGURATION
Press the Planting button at the Setup Screen and go to the Planting Configuration Tab.
1. Create or add a vehicle
Follow the on-screen wizard to set up a vehicle.
2. Add Implement
After you have completed the vehicle configuration, the Implement Attachment Wizard appears. Add a new
implement, and select the implement attachment method.
3. Select Implement Options
Use the drop-down menu to select the planter or seeder type, and press the blue right-arrow button to
continue. Check the Planter Section Row Shutoff check box to enable Row Shutoff functionality.
4. Enter Number of Rows and Spacing
Use the up and down arrows to enter the number of rows and spacing, and press the blue right-arrow button
to continue.