Crop settings, Calibration tab, Alibration – Ag Leader EDGE Ver.4.5 Users Manual User Manual
Page 189
177
H
ARVEST
• Press the Add button to add a crop.
• Press the on-screen keyboard to edit or rename existing crops.
• Press the Wrench button to access Crop Settings. For more information, see
• Press the Remove button to remove a crop.
Note: When a crop or variety is removed, all logged harvest data relating to that crop or variety will be deleted.
C
ROP
S
ETTINGS
The Crop Settings screen displays the Dry % and the
Weight/Volume for the selected crop. Here you can edit Crop
Settings and edit the map legend.
• Edit Crop Settings
The Edit Crop Settings button allows you to edit Grain Settings
values from the default, such as Dry % and the Weight/Volume
settings. Press the checkmark box to expand the number of
bushels for grains below the dry percentage.
• Legend Settings
choose Yield or Moisture.
• Edit Legend
Press the Edit Legend button to change the default legend for the selected crop type. The Legend Settings
that are made here will affect new fields of that crop type. For additional information, see
C
ALIBRATION
T
AB
The Calibration Tab is where you may perform Weight,
Moisture, Vibration and Temperature calibrations.
• Weight
The Weight button allows you to enter actual Weight Calibration
loads into the display for each grain type. For more information, see
“Grain Weight Calibration” on page
• Moisture
The Moisture button allows you to calibrate the moisture for the
selected crop type. For more information, see
• Vibration
The Vibration calibration helps eliminate any false grain flow readings while the combine is running empty.
For more information, see
“Vibration Calibration” on page
• Temperature
The Temperature button allows you to calibrate the grain temperature. For more information, see