Operations, press the Start Field Operation button. The Field Operation Wizard appears. Follow the
steps in the Wizard to select an operating configuration.

1. Grower Selection
Enter a Growing Season and Grower either by using the drop-down
arrows to select existing ones, or by pressing on the Add (plus sign)
arrow to create new ones. Press the blue right-arrow key at the
bottom of the screen to proceed to the next step.

2. Field Selection
Add a Farm and Field either by using the drop-down arrows to
select existing ones, or by pressing on the Add (plus sign) arrow to
create new ones. Press the blue right-arrow key at the bottom of
the screen to proceed to the next step.

3. Operating Configuration Selection
Use the drop-down arrow to select a configuration. Press the blue
right-arrow button to continue.

4. Product Selection
Users creating Field Operating Configuration in either Planting or
Application must select a product from the drop-down list. Press
the blue right-arrow button to continue. At the Options screen, enter
in a Controlling Product and Units.

Note: If you are selecting an Application product, you may check the box marked Show Only Tank Mixes
and Blends at the Product Selection Screen. If this box is checked, the display will only allow the selection of
tank mixes that were previously set up.

5. When you complete the steps in the Wizard, you will return to the Home Screen.