Ag Leader EDGE Ver.4.5 Users Manual - Manual (Page 27)

15
S
ETUP
F
EATURES
T
AB
Unlock codes are unique to the serial number of each display
and the feature registration number. You must supply these
numbers to your dealer when purchasing any unlock codes.
Press the Unlock button, and the Feature Registration box
appears. Use the on-screen keyboard to enter the unlock code
and press the checkmark box to enable the feature. This
feature then appears and the status is shown as “Enabled”.
Note: Once a feature is unlocked, that feature remains with that display and cannot be transferred to another.
A
DVANCED
T
AB
The Advanced Tab contains the following functions of interest
to most users:
• Copy Log Files to Memory Card at Shutdown
Checking this checkbox will copy all log files to the external
memory card when the display is turned off.
• Copy All Log Files
Press to copy all logged data in the display to the external storage
card.
• About
Displays product licensing information and copyright information.
• Module Firmware Management
Displays a list of all firmware modules and firmware versions that are available for the display. For more
information, see
“Module Firmware Management” on page 15 .
CAUTION: The Advanced Parameters, Copy Error Logs, Guidance Debug Files (Copy to Card, and Clear)
functionality is reserved for use by the manufacturer. Do not change any of these settings without specific
instruction from Technical Support.
Module Firmware Management
The Module Firmware Management screen displays a list of all
firmware modules and firmware versions that are available for
the display.
Note: The Module Firmware Management list includes module firmware that you may not be running.