Ag Leader EDGE Ver.4.5 Users Manual - Manual (Page 127)

115
A
PPLICATION
3. Press the Add button to start the process of adding components to the fertilizer blend.
Note: Any liquid herbicides set up within the system can be added to create an impregnated blend product.
4. Select the desired component from the list box. New components can be set up at this time if required.
5. Enter the amount of the first component.
6. Press Add to start adding an additional component. (A dry mix can contain up to seven individual
components.
Note: The remaining Base Amount that is available after adding product components is shown at the bottom
of the on-screen list box.
7. Select the second component for the dry mix, and enter the base amount of the second component.
Press the blue right-arrow button after the final blend component has been added.
8. Enter Manufacturer name if applicable.
Use the on-screen keyboard to enter a unique name for the blend. Press the checkmark box to complete
the process of setting up the dry blend. The new Dry Blend now appears in the Product List.
M
ISCELLANEOUS
I
TEMS
F
ERTILIZER
D
EFAULT
P
RODUCT
S
ETTINGS
Percentage (in terms of lbs./100
lbs)
Material Type
Abbreviated
name for
display and
predefined
name for SMS
N P (P
2
0
5
) K (K
2
0) Density
Anhydrous
Ammonia
Liquid
under
pressure
NH
3
82 0 0
5.14
lbs./gal. (at
60 F)
28% UAN Liquid 28% UAN 28 0 0
10.67
lbs./gal.
30% UAN Liquid 30% UAN 30 0 0
10.86
lbs./gal.
32% UAN Liquid 32% UAN 32 0 0
11.06
lbs./gal.
Ammonium
polyphosphate
(starter)
Liquid
Ammonium
polyphosphate
10 34 0
11.73
lbs./gal.