HP 3PAR Operating System Software - Manual (Page 371)

3. Select a Sampling Resolution:
•
High (Every 5 minutes) – The report is created by using a 5–minute sampling interval.
•
Medium (Hourly) – The report is created using hourly data stored in a database within
the storage system.
•
Low (Daily) – The report is created using daily data stored in a database within the storage
system.
4. For a Values over a Time Interval chart type:
a.
In the Time Interval group box, select a Start Time and End Time. If you keep the default
end time as the current date and time, you can select the start time to be a specific number
of hours prior to the end time. You also have the option to select a specific date and time
for both the start and end times.
To create your own start and end times:
a.
Select the radio button to the left of the Start Time text box.
b. Click the icon, and select a date.
c. To change the displayed date or time, click on any portion of the date or time, then
click the up or down arrow.
d. Repeat the above steps for setting a specific end time.
b. In the Show Values for Types group box, select the checkboxes for any of the Device
Types and/or RAID Types listed for which you want to display values . At least one Device
Type and one RAID type must be selected.
The following disk types are allowed: FC, NL, and SSD.
The following RAID types are allowed: RAID 0, RAID 1, RAID 5, and RAID 6.
c. In the CPGs group box, select the All radio button to include values for all CPGs, or select
the Filter radio button, then click the Select Objects button to specify the CPGs to include.
If you have selected specific CPGs, the Selected radio button is selected automatically.
For information on how to select CPGs, see
“System Reporter Filter Dialog” (page 442) .
d. In the Show Charts group box, select the checkboxes for one or more charts to display:
CPG Used Space, CPG Free Space, CPG Remaining Space, and CPG Growth Space.
At least one chart type must be selected.
5. For a Values at a Specified Time chart type:
a.
In the Point in Time or Date and Time group box, select the Current date and time radio
button, or click the icon to select a date and time. If you have selected a specific date
and time, the Selected date and time radio button is automatically selected.
Creating Reports 371