HP 3PAR Operating System Software - Manual (Page 134)

The following information is displayed on the detail pane's Settings tab:
Description Field Group
The CPG's copy space grow size in GiB. Growth Increment Copy Growth
If enabled, the CPG's growth size (in GiB) at which a
warning alert is generated. Growth Warning
If enabled, the size limit (in GiB) after which the CPG
will not grow. Growth Limit
The admin space grow size in GiB. Growth Increment Admin Growth
If enabled, the admin space's growth size (in GiB) at
which a warning alert is generated. Growth Warning
If enabled, the size limit (in GiB) after which the admin
space will not grow. Growth Limit
Fast Class (FC), Nearline (NL), or Solid State (SSD)
drives. Device Type Copy Space Allocation and
Admin Space Allocation
Speed of the specified disk (in thousands of RPMs). Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives
without spinning media (SSDs). It is meant as a rough estimation of the performance
difference between the drive and the other drives in the system. For FC and NL drives,
the number corresponds to both a performance measure and actual rotational speed.
For an SSD drive, the number is to be treated as relative performance benchmark that
takes into account in I/O per second, bandwidth, and the access time.
The CPG's RAID type. RAID Type
The requested and current level of failure tolerance for
a volume created from this CPG: ,
Cage, Port, or Magazine. Availability
The set size. Set Size
The number of contiguous bytes in KiB. Step Size
The location on physical disks where chunklets are used:
near the beginning (Fast) or near the end of the disk
(Slow). Preferred Chunklets
The filtering used for the disks making up the CPG. Disk Filter
Virtual Volumes Tab
The Virtual Volumes tab displays the virtual volumes that make up the selected CPG. There are
filters to display Summary, Allocation, Capacity, Raw Capacity, History, and Remote Copy
information.
The following information is displayed for the Summary Filter:
Description Column
The name of the virtual volume. Name
The domain in which the volume is located. Domain
The name of the virtual volume set to which the volume belongs. Set
The current state of the volume. See “System and Component Status Icons” (page 506) . State
The type of virtual volume. Type
Indicates if the selected volume is fully provisioned or a thinly provisioned virtual volume. Provisioning
134 Managing Common Provisioning Groups