HP 3PAR Operating System Software - Manual (Page 299)

Description Field Group
The raw space alert threshold (in GiB) for SSD devices. SSD Raw Space Alert
NOTE: The HP 3PAR Management Console displays the devices currently installed in your
system. For example, if you do not have Fast Class drives installed, the FC Raw Space Alert
field does not appear on the Settings tab.
Indicates if the copy space reclaim feature is Enabled or Disabled. Copy Space Reclaim
The set maximum volume retention time. Maximum Volume
Retention Time
The set size of the chunklet (in GiB) of the physical disk. Chunklet Size
Location of the system (if entered). Location Descriptors
The owner of the system (if entered). Owner
Contact information (if entered). Contact
Any notes about the system (if entered). Comments
Radio buttons indicating if you want to view either IPv4 or IPv6
network configuration information. If your system is not configured
for IPv6, the IPv6 button is disabled. IPv4/IPv6 Network
Configuration
The system's IP address. IP Address
(If IPv4 was selected) The subnet mask. Subnet Mask
(If IPv6 was selected) The decimal value indicating the number of
contiguous, higher-order bits of the address that make up the network
portion of the address. Prefix
The active system node. Active Node
The status of the system. Status
The default routing IP address. Default Route
The NTP server, if any. NTP Server
Viewing System Capacity
To view a single system's capacity information, navigate to the Systems screen and click the Capacity
tab.
Viewing System Capacity 299