HP 3PAR Operating System Software - Manual (Page 24)

3. Choose whether to enable or disable the Unique Node WWN.
4. Select the Configured Rate from the list, or keep it as Auto (Default).
5. Choose whether to enable or disable VLUN Change Notification (VCN).
6. Choose whether to enable or disable Interrupt Coalesce.
7. Click Next to view the Summary page, or click Finish to complete the configuration wizard.
iSCSI
To configure an iSCSI port:
1.
Select either Obtain an IP address automatically or Use the following IP address.
2. If you selected Obtain an IP address automatically, skip the following step.
3. If you selected Use the following IP address, enter the IP Address, Subnet Mask, and Gateway
address to use for the port.
4. Select an MTU (maximum transmission units) value from the list.
5. Click Next.
The iSNS Settings page appears.
iSNS Settings
1. (Optional) Enter the Primary IP Address.
2. (Optional) Enter the Secondary IP Address.
3. (Optional) Enter the TCP Port number or accept the default.
24 Managing Ports