HP 3PAR Operating System Software - Manual (Page 29)

3. In the General group box, enter the following:
a.
System - Select a system from the list.
b. Port - Select the port from which you are initiating the ping.
c. Destination IP Address - Enter the destination port's IP address.
d. Count - The number of times (iSCSI: from 1 to 64, RCIP: from 1 to 25) to ping the specified
IP address.
e. Wait Time - Enter the wait time in seconds (5 to 30) for each ping. (For RCIP ports only.)
f. Packet Size - Enter the number of packets (1 to 65,507) to send with each ping. (For RCIP
ports only.)
g. (Optional) Select Prevent fragmentation of packets. (For RCIP ports only.)
4. Click Ping.
The results of the ping operation appears in the Result group box.
Viewing System Ports
The system Ports screen provides information about all system ports.
To access the system Ports screen:
1.
Select Systems in the Manager Pane.
2. In the Management Tree, select Ports under the system with the port information you want to
view.
The system Ports screen provides the following tabs, depending on the types of ports supported by
the selected system: Summary, CNA, Fibre Channel, RCFC, iSCSI, RCIP, SAS, and Alerts. Refer to
the following sections for more information:
“Viewing Port Summary Information” (page 29)
“Viewing the Port Details Summary Tab” (page 31)
“Viewing CNA Ports” (page 38)
“Viewing System Fibre Channel Ports” (page 40)
“Viewing System RCFC Ports” (page 44)
“Viewing System iSCSI Ports” (page 48)
“Viewing System RCIP Ports” (page 50)
“Viewing SAS Details” (page 52)
“Viewing System Port Alerts” (page 55)
Viewing Port Summary Information
To view Port summary information:
1.
Navigate to the Ports screen.
2. In the Management Window, click the Summary tab.
Viewing System Ports 29