HP 3PAR Operating System Software - Manual (Page 192)

Description Field Group
The domain (if any) to which the tiered CPGs belong. Domain
Indicates whether the AO configuration mode is Performance,
Balanced, or Cost. Mode
The number of scheduled tasks for the AO configuration Scheduled No.
The number of scheduled, but currently suspended tasks for
the AO configuration Suspended No.
The latest running time from this AO configuration's scheduled
tasks Last Running Time
The CPG used for the tier. CPG Tier 0/Tier 1/Tier 2
The CPG's RAID type. RAID Type
Indicate the type of device (for example, SSD, FC). Device Type
The disk speed. Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives
without spinning media (SSDs). It is meant as a rough estimation of the performance difference
between the drive and the other drives in the system. For FC and NL drives, the number
corresponds to both a performance measure and actual rotational speed. For an SSD drive,
the number is to be treated as relative performance benchmark that takes into account in
I/O per second, bandwidth, and the access time.
The growth warning for the specified CPG. Growth Warning
The growth limit for the specified CPG. Growth Limit
The Alerts Tab
The AO configuration Alerts tab is divided into a list pane and a detail pane. The list pane displays
AO-related alerts within the array. The detail pane displays details about a selected alert.
The list pane displays the following information:
Description Column
The severity of the problem. Severity
The task ID. ID
The task state (for example, New). State
The last time the AO configuration was run. Last Time
Text message describing the reason for the alert. Message
The number of times the AO configuration task has been run. Repeat Count
The time the first alert occurred. First Time
The detail pane displays the following information:
Description Field Group
The severity of the problem. Severity General
The type of alert. Type
Text message describing the reason for the alert. Message
The task ID. ID
192 Managing AO Configurations