2 managing ports, Configuring ports, Configuring cna ports – HP 3PAR Operating System Software User Manual
Page 22
2 Managing Ports
“Clearing Port Parameters” (page 27)
“Editing a Port Label” (page 27)
“Setting a Port Offline” (page 27)
“Initializing a Port” (page 27)
“Synchronizing a Port with the Name Server” (page 28)
“Issuing an LIP Command” (page 28)
“Enabling a Remote Copy Interface” (page 28)
“Disabling a Remote Copy Interface” (page 28)
“Viewing System Ports” (page 29)
Configuring Ports
The HP 3PAR Management Console allows you to configure the following types of ports:
•
Converged Network Adapter (CNA)
•
Fibre Channel (FC)
•
Internet Small Computer System Interface (iSCSI)
•
Remote Copy over Fiber Channel (RCFC)
•
Remote Copy over IP (RCIP)
To learn how to configure ports with the HP 3PAR Management Console, see the following:
“Configuring CNA Ports” (page 22)
“Configuring Fibre Channel Ports” (page 25)
“Configuring iSCSI Ports” (page 25)
“Configuring an RCFC Port” (page 26)
“Configuring an RCIP Port” (page 26)
Configuring CNA Ports
To Configure a CNA port:
1.
In the Manager Pane, select Systems.
2.
Open the System tree and select Ports.
3.
Start the CNA Port Configuration wizard using one of the following methods. (CNA must be
supported and a CNA port present in the system for these actions to be available.)
Method 1 – In the CNA Summary screen within the Management Window, right-click the CNA
port you want to configure, then select Configure.
Method 2 – Select Configure CNA Port in the Common Actions panel.
Method 3 – Select a CNA port in the Management Window, then click Configure in the
Toolbar.
The CNA Port Configuration wizard appears.
22
Managing Ports