HP 3PAR Operating System Software - Manual (Page 179)

Description Column
The number of system ports that can see the host. Storage System Ports
The total number of distinct, available paths between the host and the system. Available Paths
The number of paths seen by the system reported good by the host. Healthy Paths
The used multipathing method. Multipath
The failed path monitoring method. Failed Path Policy
The monitoring interval in seconds after which the host checks for failed paths. Monitoring Interval
The device name for the selected VLUN on the host. Host Device Name
Hosts Tab
The following information is displayed:
Description Column
The volume name. Name
The domain the host is connected to. Domain
The number of ports the host is connected to. Host Ports
The number of ports on the system the host is connected to. Storage System Ports
The node ID of the system connected to the host. Node ID(s)
Indicates the persona setting for the host. Persona
Indicates the number of virtual volumes that have been exported. Volumes Exported
Indicates the total reserved size of exported volumes (in GiB). Total Reserved Size
Indicates the total size of all virtual volumes exported (in GiB). Total Exported Size
Layout Tab
The Layout tab shows a visual representation of how chunklets are used by the selected logical
disk.
NOTE: The Layout tab only appears if you have set your preferences in the HP 3PAR Management
Console to show the provisioning layout tab. See “Setting Global Preferences” (page 511) .
Viewing Virtual Volumes 179