HP 3PAR Operating System Software - Manual (Page 23)

General
1. (Optional) Click the icon to view your settings details in a pane to the right of the screen.
The details update automatically as you enter your settings.
2. Select a System name from the list.
3. Select a Port from the list.
Either iSCSI or FCoE is preselected, based on the protocol used by the selected port.
4. Select a Protocol.
5. Follow the instructions for the selected protocol:
“FCoE” (page 23)
“iSCSI” (page 24)
FCoE
The following restrictions apply when configuring CNA ports using the FCoE protocol:
•
Only host connection mode is allowed.
•
Point is the only connection type allowed.
•
Only single rate is supported.
To configure an FCoE port:
1.
The Connection Mode is Host. This option is preselected and disabled.
2. The Connection Type is Point. This option is preselected and disabled.
Configuring Ports 23