HP 3PAR Operating System Software - Manual (Page 137)

The following information is displayed for the Remote Copy filter:
Description Column
The volume name. Volume tree depth in parenthesis. Name
The domain to which the virtual volume belongs. Domain
The state of the system. State
Indicates if the volume is a base volume, physical copy, or virtual copy. Type
Indicates if the volume is fully (Full) or thinly provisioned (TPVV). Provisioning
The volume's RAID type. RAID
The size of the volume in GiB. Virtual Size
The host to which the volume is exported. A red entry indicates an inactive VLUN.
A blue entry indicates an active VLUN. Exported To
The volume's Remote Copy status. RC Status
The Remote Copy group to which the volume belongs. RC Group
The sync state of the remote copy (such as, Synced, Stopped). Sync State
The number of writable LUNs. Writable LUNs
Logical Disks Tab
NOTE: The Logical Disks tab only appears if you have set your preferences in the HP 3PAR
Management Console to show the logical disks. See “Setting Global Preferences” (page 511) .
The following information is displayed on the Logical Disks tab:
Description Column
The name of the logical disk. Name
The domain in which the logical disk is located. Domain
The current state of the logical disk. See “System and Component Status Icons” (page 506)
.
State
The disk type, Fast Class (FC), Nearline (NL), or Solid State (SSD). Device Type
Speed of the specified disk (in thousands of RPMs). Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives without spinning media (SSDs).
It is meant as a rough estimation of the performance difference between the drive and the other drives in the system.
For FC and NL drives, the number corresponds to both a performance measure and actual rotational speed. For an
SSD drive, the number is to be treated as relative performance benchmark that takes into account in I/O per second,
bandwidth, and the access time.
The logical disk's RAID type. RAID
Viewing Common Provisioning Groups 137