HP 3PAR Operating System Software - Manual (Page 231)

“Viewing Remote Copy System Ports” (page 231)
Viewing Remote Copy System Ports
To view a system's available Remote Copy ports:
Navigate to the Available Storage Systems screen, then click the numeric value under the RCFC,
RCIP, or Total column.
or
1.
In the Manager Pane, select Remote Copy.
2. In the Management Tree, under Available Storage Systems, select the Ports node under the
system whose Remote Copy ports you want to view.
Information about a system's Remote Copy ports is displayed on four tabs, RC Ports, RCIP, RCFC,
and Inventory.
RC Ports Tab
The list pane of the RC Ports tab displays summary information about the system's Remote Copy
ports. The detail pane displays details about a selected port from the list pane.
The following information is displayed in the list pane:
Description Column
The location of the port in Node:Slot:Port format. Position
The designated port label. Label
The WWN or MAC address of the connected device. WWN/MAC
The state of the port. See “System and Component Status Icons” (page 506) . State
The type of port, either RCIP or RCFC. Type
Type of device that the port is connected to: Free, Disk, Host, Peer, RC, or InServ. Connected Device Type
Viewing Remote Copy Information 231