HP 3PAR Operating System Software - Manual (Page 28)

3. Click Yes.
Synchronizing a Port with the Name Server
NOTE: This operation can only be performed on Fibre Channel and RCFC ports.
To synchronize a port with the name server:
1.
Navigate to the ports Summary screen.
2. Right-click the port you want to synchronize then select Name Server Sync in the menu list.
The Name Server Sync dialog box appears.
3. Click Yes.
Issuing an LIP Command
NOTE: This operation can only be performed on Fibre Channel and RCFC ports.
To issue an LIP (Loop Initialization Primitive) command:
1.
Navigate to the ports Summary screen.
2. Right-click the port on which you want to issue the LIP command, then select Issue LIP in the
menu list.
The Issue LIP dialog box appears.
3. Click Yes.
Enabling a Remote Copy Interface
NOTE: This operation can only be performed on RCIP ports.
To enable a Remote Copy interface:
1.
Navigate to the ports Summary screen.
2. Right-click the disabled Remote Copy port you want to enable then select Enable Interface in
the menu list.
The Enable Interface dialog box appears.
3. Click Yes.
Disabling a Remote Copy Interface
NOTE: This operation can only be performed on RCIP ports.
To disable a Remote Copy interface:
1.
Navigate to the ports Summary screen.
2. Right-click the Remote Copy port you want to disable, then select Disable Interface in the menu
list.
The Disable Interface dialog box appears.
3. Click Yes.
Pinging a Port
To ping an iSCSI or RCIP port:
1.
Navigate to the ports Summary screen.
2. Right-click the iSCSI or RCIP port you want to ping then select Ping in the menu list.
The Ping Port dialog appears.
28 Managing Ports