Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 80)

Port blade terminology, numbering, and platform support (Continued) TABLE 9
Supported on:
Blade Blade ID
(slotshow) DCX family DCX 8510
family
Ports Definition
FC8-64 77 Yes Yes 64 8-Gbps port blade supporting 2, 4, and 8
Gbps port speeds. The Brocade DCX
and Brocade DCX 8510 Backbone
families support loop devices on 64-port
blades in a Virtual Fabrics-enabled
environment. The loop devices can only
be attached to ports on a 64-port blade
that is not a part of the default logical
switch.
Ports are numbered from 0 through 31
from bottom to top on the left set of ports
and 32 through 63 from bottom to top on
the right set of ports.
FC16-32 97 No Yes 32 A 32-port, 16-Gbps port blade supporting
2, 4, 8, 10, and 16 Gbps port speeds.
NOTE
10 Gbps speed for FC16-xx blades
requires the 10G license.
Ports are numbered from 0 through 15
from bottom to top on the left set of ports
and 16 through 31 from bottom to top on
the right set of ports.
FC16-48 96 No Yes 48 A 48-port, 16-Gbps port blade supporting
2, 4, 8, 10, and 16 Gbps port speeds.
NOTE
10 Gbps speed for FC16-xx blades
requires the 10G license.
Ports are numbered from 0 through 23
from bottom to top on the left set of ports
and 24 through 47 from bottom to top on
the right set of ports.
FC16-64 153 No Yes 64 A 64-port, 16-Gbps port blade supporting
4, 8, and 16 Gbps port speeds. These
ports have 16 QSFPs per blade.
FC Ports are numbered from 0 through
63 from bottom to top. QSFPs are
numberd from 0 through 15 from bottom
to top.
Performing Advanced Configuration Tasks
80 Fabric OS Administrators Guide
53-1003130-01