Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 361)

FIGURE 44 Dedicated path with Virtual Fabrics
Figure 45 shows a logical representation of FID1 in Figure 44 . To create the dedicated path, you must
create and activate a TI zone in FID1 that includes the circled ports shown in Figure 45 .
FIGURE 45 Creating a TI zone in a logical fabric
You must also create and activate a TI zone in the base fabric to reserve the XISLs for the dedicated
path. In
Figure 46 , the XISLs highlighted (by a dotted line) in the base fabric can be reserved for FID1
by defining and activating a base fabric TI zone that consists of ports 10, 12, 14, and 16. You must also
include ports 3 and 8, because they belong to logical switches participating in the logical fabric. For the
TI zone, it is as though ports 3 and 8 belong to Domains 1 and 2 respectively.
FIGURE 46 Creating a TI zone in a base fabric
Traffic Isolation Zoning
Fabric OS Administrators Guide 361
53-1003130-01