Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 116)

1. Connect to the switch and log in using an account with admin permissions.
2. Enter thezone --rdcreate command.
3. Enter the cfgSave command to save the frame redirect zones to the defined configuration.
The following example creates a redirect zone, given a host (10:10:10:10:10:10:10:10), target
(20:20:20:20:20:20:20:20), virtual initiator (30:30:30:30:30:30:30:30), and virtual target
(40:40:40:40:40:40:40:40):
switch:admin>zone --rdcreate 10:10:10:10:10:10:10:10 20:20:20:20:20:20:20:20 \
30:30:30:30:30:30:30:30 40:40:40:40:40:40:40:40 restartable noFCR
Deleting a frame redirect zone
Use the following procedure to delete a frame redirect zone.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the zone --rddelete command to remove the base redirect zone object, "red_______base".
NOTE
When the base zone is removed, the redirect zone configuration "r_e_d_i_r_c__fg" is removed as
well.
3. Enter the cfgSave command to save changes to the defined configuration.
Example of deleting a frame redirect zone
switch:admin>
zone --rddelete \ red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20
Viewing frame redirect zones
Use the following procedure to view frame redirect zones.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the cfgShow command.
Deleting a frame redirect zone
116 Fabric OS Administrators Guide
53-1003130-01