beautypg.com

Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 480

background image

FIGURE 69 AD0 with three zones

sw0:admin> ad --exec 255 "cfgshow"

Zone CFG Info for AD_ID: 0 (AD Name: AD0, State: Active) :

Defined configuration:

cfg: AD0_cfg AD0_RedZone

zone: AD0_RedZone

10:00:00:00:01:00:00:00; 10:00:00:00:02:00:00:00

Effective configuration:

cfg: AD0_cfg

zone: AD0_RedZone

10:00:00:00:01:00:00:00

10:00:00:00:02:00:00:00

Zone CFG Info for AD_ID: 1 (AD Name: AD1, State: Active) :

Defined configuration:

cfg: AD1_cfg AD1_BlueZone

zone: AD1_BlueZone

10:00:00:00:02:00:00:00; 10:00:00:00:03:00:00:00

Effective configuration:

cfg: AD1_cfg

zone: AD1_BlueZone

10:00:00:00:02:00:00:00

10:00:00:00:03:00:00:00

Zone CFG Info for AD_ID: 2 (AD Name: AD2, State: Active) :

Defined configuration:

cfg: AD2_cfg AD2_GreenZone

zone: AD2_GreenZone

10:00:00:00:04:00:00:00; 10:00:00:00:05:00:00:00

Effective configuration:

cfg: AD2_cfg

zone: AD2_GreenZone

10:00:00:00:04:00:00:00

10:00:00:00:05:00:00:00

sw0:admin> zone --copy AD1.AD1_BlueZone AD0_BlueZone

sw0:admin> zone --copy AD2.AD2_GreenZone AD0_GreenZone

sw0:admin> cfgadd "AD0_cfg", "AD0_BlueZone; AD0_GreenZone"

sw0:admin> cfgenable AD0_cfg

You are about to enable a new zoning configuration.

This action will replace the old zoning configuration with the

current configuration selected. If the update includes changes

to one or more traffic isolation zones, the update may result in

localized disruption to traffic on ports associated with

the traffic isolation zone changes

Do you want to enable 'AD0_cfg' configuration (yes, y, no, n): [no] y

zone config "AD0_cfg" is in effect

Updating flash ...

sw0:admin> ad --select 255

sw0:AD255:admin> ad --add AD0 -d "10:00:00:00:03:00:00:00;

10:00:00:00:04:00:00:00; 10:00:00:00:05:00:00:00"

sw0:AD255:admin> ad --apply

You are about to enforce the saved AD configuration.

This action will trigger AD apply to all switches in the fabric

Do you want to apply all admin domains (yes, y, no, n): [no] y

sw0:AD255:admin> ad --clear -f

You are about to delete all ADs definitions and zone databases under them.

This could involve multiple independent zone transactions and

Managing Administrative Domains

480

Fabric OS Administrators Guide

53-1003130-01