beautypg.com

Database distribution settings, The fcs policy, refer to – Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 239

background image

Interaction between fabric-wide consistency policy and distribution settings (Continued)

TABLE 50

Distribution
setting

Fabric-wide consistency policy

Accept (default)

Database is not protected, the
database can be overwritten.

If the switch initiating a
distribute command has a strict
or tolerant fabric-wide
consistency policy, the fabric-
wide policy is also overwritten.

May not match other databases
in the fabric.

Database is not protected.

Automatically distributes
activated changes to other
v6.2.0 or later switches in
the fabric.

May not match other
databases in the fabric.

Database is not protected.

Automatically distributes
activated changes to all
switches in the fabric.

Fabric can only contain
switches running Fabric OS
v6.2.0 or later.

Active database is the same
for all switches in the fabric.

NOTE
Starting with Fabric OS 7.3.0, Access Gateways are capable of receiving the password database
distributed by native switches and domains. However, the Access Gateways are not capable of
distributing the password database to the switches or domains.

Database distribution settings

The distribution settings control whether a switch accepts or rejects distributions of databases from
other switches and whether the switch may initiate a distribution. Configure the distribution setting to
reject when maintaining the database on a per-switch basis.

Table 51

lists the databases supported in Fabric OS v6.2.0 and later switches.

Supported policy databases

TABLE 51

Database type

Database identifier (ID)

Authentication policy database

AUTH

DCC policy database

DCC

FCS policy database

FCS

IP Filter policy database

IPFILTER

Password database

PWD

SCC policy database

SCC

Use the chassisDistribute command to distribute IP filter policies. To distribute other security policies,
use the distribute command. The distribute command distributes the database also to Access
Gateways in non-VF mode.

Database distribution settings

Fabric OS Administrators Guide

239

53-1003130-01