Displaying the database distribution settings, Enabling local switch protection, Disabling local switch protection – Brocade Fabric OS Administrators Guide (Supporting Fabric OS v7.3.0) User Manual
Page 240: Acl policy distribution to other switches, Distributing the local acl policies, Acl policy distribution, To other switches, Acl policy distribution to other, Switches
Displaying the database distribution settings
1. Connect to the switch and log in using an account with admin permissions, or an account with OM
permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg --showall command.
The following sample output shows the database distribution settings.
switch:admin> fddcfg --showall
Local Switch Configuration for all Databases:-
DATABASE - Accept/Reject
---------------------------------
SCC - accept
DCC - accept
PWD - accept
FCS - accept
AUTH - accept
IPFILTER - accept
Fabric Wide Consistency Policy:- ""
Enabling local switch protection
1. Connect to the switch and log in using an account with admin permissions, or an account with OM
permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg --localreject command.
Disabling local switch protection
1. Connect to the switch and log in using an account with admin permissions, or an account with OM
permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg --localaccept command.
ACL policy distribution to other switches
This section explains how to manually distribute local ACL policy databases. The distribute command
has the following dependencies:
• All target switches must be running Fabric OS v6.2.0 or later.
• All target switches must accept the database distribution (refer to
Database distribution settings
page 239).
• The fabric must have a tolerant or no (absent) fabric-wide consistency policy (refer to
on page 241).
If the fabric-wide consistency policy for a database is strict, the database cannot be manually
distributed. When you set a strict fabric-wide consistency policy for a database, the distribution
mechanism is automatically invoked whenever the database changes.
• The local distribution setting must be accepted. To be able to initiate the distribute command, set
the local distribution to Accept.
Distributing the local ACL policies
1. Connect to the switch and log in using an account with admin permissions, or an account with OM
permissions for the FabricDistribution RBAC class of commands.
2. Enter the distribute -p command.
Displaying the database distribution settings
240
Fabric OS Administrators Guide
53-1003130-01